Welcome to American Hard Bag-------> Looking for a full package?

Looking for Installation Parts?-------> Click here for Installation Parts

We Build Full Systems!--------> Check it out

SPECIAL FINANCING:

ON ALL CUSTOM KITS WHEN YOU CALL IN!

Return

HERE ARE THE STEPS TO MAKE YOUR RETURN AS SMOOTH AND QUICK AS POSSIBLE.

GET A RETURN AUTHORIZATION NUMBER

Give us a call or send us an email to get an RA number assigned to you. We do not accept returns without an RA number. See contact information below.

GET FREE RETURN SHIPPING

We pay for return shipping on approved returns if the item(s) being returned do not fit as stated on the product page or do not match the description as stated on the product page. See our Fitment Guarantee below ↓. We require accurate weight and dimensions of your return package. We will then email you a return shipping label. See contact information below. Note: Cancellations due to a change in mind or poor planning do not qualify for free return shipping.

Fitment Guarantee
In the event your item(s) do not fit your bike as we have stated in print online, we do offer a 100% credit for that item(s) in exchange for comparable item(s) that we carry. In the event that we do not carry or can not obtain a product that is the correct fit for your specified bike, We offer a 100% refund including the original shipping as well as the return shipping, and shipping for the replacement item(s). Please note that we do not offer a 100% guarantee on fitment of items that do not state on the product page that they fit your particular bike. However as long as the product is in new and resealable condition we generally will exchange the product less shipping.

RETURNS NEED TO COME BACK PACKED WELL AND IN GOOD SHAPE

You are 100% responsible for the products you are returning. Even damaged or defective goods must be returned in good shape. Poorly packed or damaged returns will not be accepted. 

EXCHANGES - FREE SHIPPING BOTH WAYS

Replacements are not sent out until your returned part has arrived back at our facility and have been inspected. We work hard to ensure that exchanges go as quickly and smoothly as possible. However we need to assess the returned condition of the product before we can send out a replacement. No exceptions. Free shipping is contingent on the circumstances and bound to our refund policy as stated here. 

REFUNDS AND CANCELLATIONS 

Please read our refund policy here.

OVERNIGHT SHIPPING

We don’t do overnight shipping for a wide range of reasons. Shipping is generally UPS Ground or in some cases where it makes sense for small items we use USPS Priority Mail. 

CONTACT FOR RA# OR RETURN SHIPPING LABELS

Phone: 1(888) 311-0016

Email: customerservice@americanhardbag.com

Send Returns to: 
American Hard Bag
4121 Citrus Avenue  Suite 1
Rocklin, CA 95677

Attention: All returns should have the RA# clearly written on the outside of the shipping box on two sides. 

American Hard Bag Aggressor Pro 80 Subwoofer Kit

The Aggressor Pro 80 subwoofer mounting kit for Harley Davidson motorcycles provides a sturdy and serviceable mounting location for two 8” subwoofers. This kit is designed to reinforce the saddlebag with the structure required for more sound output.

What is needed and what is included in the Aggressor Pro 80- Kit

Tools Needed
• Plunge router
• Standard pattern flush trim bit (bearing on the shaft side)
• Jig saw
• 7/64” drill bit
• ⅛” drill bit
• Phillips screwdriver/screw gun
• Right angle adapter for Phillips bit
• Masking tape

Included in the Kit
• Left & right side Aggressor woofer mounts
• Router jig x 2 (MDF)
• Gasket material
• Stainless steel hardware to mount the kit to the bag
• Stainless steel hardware to mount the woofer to the kit
• Double sided mounting tape (for the grills)
• Powder coated steel speaker grills x 2

Step 1 - Remove the Bags

Remove the lids and then the bags from the bike. Tip: the lids are a lot easier to remove when the bags are still mounted to the bike. 

Place the bags on a soft surface and tape up the outside of your bags to protect the paint. 

Step 2 - Tape it Up

Cover the area inside of the bag where the woofer mounting kit will be placed with light colored masking tape. 

In the image here, I have used paper sign vinyl transfer tape instead of masking tape, but any light colored masking tape will do.

Step 3 - Marking the Woofer Mount Location Inside of the Bag

Mount the 8” woofer to the woofer mount and place it inside of the bag. You want the woofer on the mounting kit when you do this so that you can be sure that you are accounting for woofer clearance. It is not unusual for the woofer basket to be able to interfere with the extrusion at the bottom of the bag. 

Position the entire assembly as far down in the bag and as far forward in the bag as it can go yet still remain entirely on the flat surface of the bag wall. Then move the mount upward slightly (about 3/16”) so that the mount and woofer are not touching any part of the bottom of the bag. You want a very small gap here. Pay attention to the rotation of the mount. Keep things soiree as you move the mount around. 

Pay attention to the rear bag fastener hole. Remember that you will need enough clearance around this hole for the rubber bushing to go back in place without interfering with the woofer mount. 

Once in the correct position, mark the bag with a pen or pencil so that you will be able to accurately reacquire this same location in the next step.  
Back to top