Hertz Mille Pro MPX 690.3 Pro 6x9" Coaxial 3-Way Speaker
$675.00
$599.99
Sales Tax Included
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
Quantity
Features:
1. 38 mm pure copper woofer voice coil wound on a Polyamide former for exceptional power handling and dynamic compression-free reproduction.
2. Pressed-pulp cone with cotton fibers material, combining stiffness and lightweight for a wide frequency response.
3. Large rubber surround designed for long throw and optimal sound damping.
4. Over-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels.
5. Aerodynamic thus acoustically transparent aluminium alloy basket, eliminates rear wave reflections.
6. Anti-vibration rubber magnet cover, damps spurious vibrations.
7. 28mm voice coil Neodymium Tetolon fiber dome tweeter, for undistorted mid-frequency reproduction.
8. 20mm voice coil Neodymium Tetolon fiber dome super tweeter, to naturally compensate for drop-off in frequency response due to speaker horizontal installation.
9. Tweeter faceplate with geometry optimized with FEM (Finite Element Modeling) simulations, to provide excellent off-axis frequency response up to 24kHz by perfectly mixing the two tweeters’ emission.
10. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
Specs:
Technical Specs
|
Component |
Coaxials |
|
Size mm (in.) |
(6 x 9) |
|
Power Handling - Continuous W |
130 |
|
Power Handling - Peak W |
260 |
|
Impedance Ohm |
4 |
|
Woofer Voice Coil Ø mm (in.) |
38 (1.5) |
|
Tweeter Voice Coil Ø mm (in.) |
28 (1.1) |
|
Frequency Response Hz |
30 ÷ 24k |
|
Woofer Magnet size D x d x h mm (in.) |
107 x 45 x 20 (4.21 x 1.77 x 0.79) |
|
Weight of one speaker kg (lb.) |
2.28 (5.03) |
|
Woofer Magnet |
High density flux ferrite |
|
Tweeter Magnet |
Neodymium |
|
Cone |
Pressed-pulp cone with cotton fibers |
|
Dome |
Tetolon |
|
Xmech mm (in.) |
±8 (0.31) |
Electro-Acoustic Specs:
|
D mm |
169 |
|
Re Ohm |
3 |
|
Fs Hz |
50 |
|
Le mH |
0,07 |
|
Vas I |
24 |
|
Mms g |
30 |
|
Cms mm/N |
0,34 |
|
BL T*m |
7,2 |
|
Qts |
0,43 |
|
Qes |
0,55 |
|
Qms |
2 |
|
Spl dB |
94 |
PRODUCT OVERVIEW
Content Left
PLUG & PLAY OPTION
The plug and play option gives you:
Radio Interface: PLUG & PLAY SIGNAL ADAPTER FOR AFTERMARKET AMPLIFIER 14+ SKU: WH-14-PNP-F
Amplifier Power Kit and Mounting Pad: FAIRING MOUNTED AMPLIFIER POWER KIT TOURING 98+SKU: WH-8AWG-F
Plug & Play Speaker Wire Harnesses for 2014 and Later Bikes: SPEAKER POD PLUG ADAPTERS STREET GLIDE, ROAD GLIDE, ULTRA 14+SKU: WH-14-PNP-P
Plug & Play Accessory Tap: PLUG & PLAY ACCESSORY TAP (NO PASS THROUGH)SKU: WH-14-ACC
SPECIFICATIONS
VELOCITY RZA1000.4 AMPLIFIER
1,350 Watts Peak Power
4 x 275 Watts @ 2 Ohm RMS
4 x 150 Watts @ 4 Ohm RMS
2 x 550 Watts @ 4 Ohm Bridged RMS
Crossover High/Low Pass 40hz - 400hz @ 12db
Signal Input Range .41V - 10V Balanced High & Low Level
RCA Input - Yes
Speaker Level Input - Yes (over RCA connection)
Efficiency 87% @ Full Power
Remote Trigger 12V or Signal Sense
Fuse Size 60A
Power Cable 8 Gauge