Hertz Fairing Combo Kit - Stage1
From
$1,649.99
$1,310.00
Sales Tax Included
This is a great 2-Speaker starter package or just fairing only package.
If you want to upgrade later on, no problem, you'll have an additonal 2-channels on the amplifier to use (some additional wiring will be needed).
This package includes:
One pair of the Hertz SX165 Neo 6.5" Speakers
One Hertz SP4-900 Amplifier
All wiring needed to complete 2-speaker and amp installation and interface with your factory radio.
Add a Hertz S8 DSP
What year and model bike is this for? Please explain any extras pertaining to the audio system (optional)
Quantity
SX 165 Neo 6.5" Speakers
This is a truly amazing Harley-specific speaker. Hertz hit it out of the park with this design. The large oversized 1.4-inch tweeter is the loudest non-horn tweeter we have ever tested and it is louder and better sounding than many stand-alone horns. The woofer of this speaker is a pro audio design that has been optimized for use in Harley applications. Designed to perform in the fairing, tour packs, and lower fairings these woofers deliver clarity and loudness for even the largest scale systems.
1. Nature-proof high stiffness pressed-paper cone featuring innovative water/ humidity resistant and anti-UV treatments.
2. Durable Extreme SPL performance in a compact size & light-weight thanks to the N38 H Neodymium grade magnet.
3. Unparalleled power handling delivered by the double layer copper voice coil, wound on polyamide former.
4. Hi-SPL 1.4” Neodymium magnet PEI dome tweeter with resettable solid-state tweeter protection circuit.
5. Double faston terminals allow daisy-chaining of multiple units and provide compatibility with most common motorcycle connections.
Technical Specs:
Component SPL COAXIAL
Size mm (in.) 165 (6.5)
Power Handling - Continuous W 100
Power Handling - Peak W 200
Impedance Ohm 4
Tweeter diaphragm mm (in.) PEI
Woofer Voice Coil Ø mm (in.) 38 (1.5)
Tweeter Voice Coil Ø mm (in.) 28 (1.1)
Frequency Response Hz 100 ÷ 20k
Woofer Magnet size D x d x h mm (in.) 70 x 45 x 7 (2.76 x 1.77 x 0.28)
Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.) 0,94 (2.08)
Woofer Magnet Special Neodymium N38 H
Tweeter Magnet Special Neodymium N38 H
Cone Water repellent pressed paper
Electro-acoustic Specs:
D mm 128
Re Ohm 3,3
Fs Hz 110
Le mH 0,061
Vas I 4,92
Mms g 10,14
Cms mm/N 0,21
BL T*m 5,83
Qts 0,64
Qes 0,68
Qms 9,7
Spl dB 96,5
Hertz SP4-900 Amplifier
SP 4.900 is the first Hertz amplifier featuring the renewed Hertz ADC (Advanced D-Class) output stage, reaching up to 85% efficiency and delivering an impressive power rating of 160 x 4 (4Ω) W RMS or 500 W x 2 (4Ω) W RMS when bridged, with an ultra-compact size of 211.6 (8.3) x 130 (5.1) mm (in.). Being ultra-compact with impressive power, SP 4.900 is the ideal choice for Harley applications.
- Up to 87% efficiency thanks to ADC (Advanced D-Class) output stage.
- USS (Universal Speakers Simulators) allows SP 4.900 to work with head units featuring the “speaker load detection” circuit.
- 160 W RMS x 4 (4Ω) with ultra-compact size 211.6 x 130 x 49 / 8.3 x 5.1 x 1.9 (mm/inch).
- IP55 aluminium chassis for maximum protection against humidity and external agents.
- No cooling fan to prevent internal accumulation of dirt 6. Sealed power cord, line inputs, and speaker outputs to prevent oxidation.
- Crossovers filters and controls on a single side to facilitate calibration when the product is installed.
General Specs:
Channels 4 - 3 - 2
Nominal power supply voltage 11 ÷ 15 VDC
Pulse Operating voltage 6 ÷ 16 VDC
Idling current 1.1 A
Idling current when off 0.03 mA
Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A
Remote IN 6 ÷ 15 VDC (9 mA)
DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.02%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 200
Bandwidth @ -3 dB 10 Hz ÷35 kHz
S/N ratio (A weighted @ 1 V Input) 105 dBA
Pre-In sensitivity 0.6 ÷ 6 VRMS
Speaker-In sensitivity 2.2 ÷ 22 VRMS
Minimum load impedance:
@ 4Ch 2Ω
@ 3Ch 2Ω + 2Ω + 4Ω
@ 2Ch 4Ω
IP Rating IP55
Operating Temperature Range 0°C (32°F) to 55°C (131°F)
Max size (mm/inch) 211.6 x 130 x 49 / 8.33 x 5.118 x 1.929
Weight (kg/lbs) 2.15 / 4.74
Adjustable Crossovers yes
Output Power:
Output Nominal Power (RMS) @ 14.4 VDC, THD 1%:
4 Ch: 160 W x 4 (4Ω)
4 Ch: 250 W x 4 (2Ω)
3 Ch: 160 W x 2 (4Ω) + 500 W x 1 (4Ω)
3 Ch: 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
2 Ch: 500 W x 2 (4Ω)
Total Power 1000 W
INPUTS / FILTERS:
INPUTS: Pre IN / Speaker IN
Ch 1-2
Full -
Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Lo-pass: 50 ÷ 5k Hz @ 12 dB/Oct.
Ch 3-4
Full -
Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Lo-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Bass Boost 45Hz (adjustable) (0 ÷ 8) dB [LP = ON only]
Fitment
2014-2023 Street Glide, Road Glide, Ultra, Tri Glide, (Non CVO)
CVO Requires more information to determine correct harnesses. We suggest contacting us to verify.
PRODUCT OVERVIEW
Content Left
PLUG & PLAY OPTION
The plug and play option gives you:
Radio Interface: PLUG & PLAY SIGNAL ADAPTER FOR AFTERMARKET AMPLIFIER 14+ SKU: WH-14-PNP-F
Amplifier Power Kit and Mounting Pad: FAIRING MOUNTED AMPLIFIER POWER KIT TOURING 98+SKU: WH-8AWG-F
Plug & Play Speaker Wire Harnesses for 2014 and Later Bikes: SPEAKER POD PLUG ADAPTERS STREET GLIDE, ROAD GLIDE, ULTRA 14+SKU: WH-14-PNP-P
Plug & Play Accessory Tap: PLUG & PLAY ACCESSORY TAP (NO PASS THROUGH)SKU: WH-14-ACC
SPECIFICATIONS
VELOCITY RZA1000.4 AMPLIFIER
1,350 Watts Peak Power
4 x 275 Watts @ 2 Ohm RMS
4 x 150 Watts @ 4 Ohm RMS
2 x 550 Watts @ 4 Ohm Bridged RMS
Crossover High/Low Pass 40hz - 400hz @ 12db
Signal Input Range .41V - 10V Balanced High & Low Level
RCA Input - Yes
Speaker Level Input - Yes (over RCA connection)
Efficiency 87% @ Full Power
Remote Trigger 12V or Signal Sense
Fuse Size 60A
Power Cable 8 Gauge