RF Rear Bypass Harness, Saddlebag Mounted Factory Amp 21-23

Bypass the Factory Fosgate Amplifier: Keep Your Factory Saddlebag Connections Intact and Fully Functional
This harness loops the amplifier input circuits to the amplifier output circuits when removing a factory Harley Davidson saddlebag mounted amplifier. Now the signal circuits at the front of the bike will be directly connected to the lid speakers without any cutting. The factory saddlebag plugs can be kept in play and there is no need for aftermarket speaker lines to be run from front to back on the bike. 

NOTE: The 2021-2023 bikes with the Fosgate for Harley amplifier installed in the bag is wired differently than the previous Boom2 systems. As such, if you are using our Radio T-Harness, it will require the use of another harness in addition to the bypass plug. 

What you will find when installing the Radio T-Harness and RF Bypass plug is that the front and rear outputs to the RCAs are reversed. The rear out of the radio now appears on the front RCAs of the T-Harness and the front out of the radio appears on the rear RCAs. Easy enough to switch, no big deal.

The rear speaker wires on the T-Harness do connect to the saddlebag lid speakers just fine. However the issue is with the front speaker wires from the T-Harness. You will find that they do not connect to the front speaker pods. You will simply connect the front out of the amp to the fairing speaker pods, which can be done if you do not wish to purchase another harness but by adding the VWH-FPOD harness we offer, it will provide convenient disconnects to the fairing pods.

FITMENT:

Will work on 2021-2024 Ultra's, Limited's and Tri Glides with Fosgate for Harley systems.

Will not work on 2023 and newer CVO's

Will not work on 2024 and newer Road or Street Glides

If you are unsure just give us a call at 888-311-0016