Welcome to our store Learn more

New collections added! Learn more

SPECIAL FINANCING:

ON ALL CUSTOM KITS WHEN YOU CALL IN!
1 10
VelocityVelocity Speaker Design  |  SKU: 6716b5b06fbcf

Velocity Overdrive 4-Speaker for 2014-2024 Ultra Motorcycle Sound System Harley Speakers

$2,75199

Description

Best package available for your 14-Up Ultra. Loud! Clear! Clean & Crisp.

Compatible With Select 1998-2023 Motorcycles: Street Glide, Electra Glide, CVO Road Glide, Electra Glide Low, Road Glide, Road King, Ultra Limited

↓↓↓ See below for more info, features, specs, and warranty ↓↓↓

Specs

Radio T-Harness

2014 and up Road Glide, Street Glide, Electra Glide, Ultra, CVO, and all amplified and non amplified variations. Amplifier bypass plugs required for all factory amplified systems.?Amplifier bypass plugs are available. Balanced speaker level on RCA, requires an amplifier or DSP that is designed to accept speaker level in on RCA connection(most all quality amplifiers and DSPs do accept speaker level, but check your equipment to make sure). CVO and bikes that only have fairing speakers will require a radio flash to enable the rear RCA output. You can flash your own bike with a separate single bike flash tool.

Velocity RZA1000.4

Specifications:

• 1,350 Watts Peak Power

• 4 x 275 Watts @ 2 Ohm RMS

• 4 x 150 Watts @ 4 Ohm RMS

• 2 x 550 Watts @ 4 Ohm RMS

• Frequency Response 20hz - 25khz

• Crossover High/Low Pass 40hz - 400hz @ 12db

• Signal Input Range .41V - 10V Balanced High & Low Level

• RCA Input - Yes

• Speaker Level Input - Yes (over RCA connection)

• Efficiency 87% @ Full Power

• Remote Trigger 12V or Signal Sense


Hertz S8 DSP

General Specifications:
Nominal Power supply voltage / fuse: 7 ÷ 20 VDC / 1A
Pulse operating voltage: 5 ÷ 24 VDC
Idling current: 0.34 A
OFF current (ART= OFF): <80 uA
OFF current (ART= ON): <80 uA
Remote IN 6 ÷ 20 VDC (10 mA)
Remote OUT 4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): 1.5 ÷ 7 VDC

Fitment

Radio T-Harness

2014 and up Road Glide, Street Glide, Electra Glide, Ultra, CVO, and all amplified and non amplified variations. Amplifier bypass plugs required for all factory amplified systems.?Amplifier bypass plugs are available. Balanced speaker level on RCA, requires an amplifier or DSP that is designed to accept speaker level in on RCA connection(most all quality amplifiers and DSPs do accept speaker level, but check your equipment to make sure). CVO and bikes that only have fairing speakers will require a radio flash to enable the rear RCA output. You can flash your own bike with a separate single bike flash tool.

Warranty

Payment & Security

Payment methods

  • PayPal
  • Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Back to top