Hertz Fairing and Lower 4-Speaker and Amplifier System 2014-2023 Street Glide

Are you looking for just an upper and lower fairing speaker package for your Street Glide (2014-2023)?

This is the new, all-Hertz Upper and Lower Fairing System Package.

This is a great-sounding system with options that will make it sound even better (if that is possible).

What’s Included:

• SP4.500 Amplifier
• Set of SX 165 Neo 6.5" Fairing Speakers
• Set of SV165 Neo 6.5" Lower Fairing Speakers **
• Radio T-Harness with amplifier power harness

** (Lower fairing and lower fairing speaker pods not included)

Optional Upgrades:

• Upgrade to the more powerful SP4.900 Amplifier
• S8 DSP (Digital Signal Processor)

↓↓↓ See below the option selection for more Info ↓↓↓

Hertz SP4.500 Amplifier (** Upgrade to the SP900)
Specs:

Channels 4 - 3 - 2
Nominal power supply voltage 11 ÷ 15 VDC
Pulse Operating voltage 6 ÷ 16 VDC
Idling current 1.1 A
Idling current when off 0.03 mA
Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A
Remote IN 6 ÷ 15 VDC (9 mA)
DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.02%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 200
Bandwidth @ -3 dB 10 Hz ÷35 kHz
S/N ratio (A weighted @ 1 V Input) 105 dBA
Pre-In sensitivity 0.6 ÷ 6 VRMS
Speaker-In sensitivity 2.2 ÷ 22 VRMS
Minimum load impedance:
@ 4Ch 2Ω
@ 3Ch 2Ω + 2Ω + 4Ω
@ 2Ch 4Ω
IP Rating IP55
Operating Temperature Range 0°C (32°F) to 55°C (131°F)
Max size (mm/inch) 211.6 x 130 x 49 / 8.33 x 5.118 x 1.929
Weight (kg/lbs) 2.15 / 4.74
Adjustable Crossovers yes


SX165Neo 6.5" Fairing Speakers
Specs:

Component SPL COAXIAL
Size mm (in.) 165 (6.5)
Power Handling - Continuous W 100
Power Handling - Peak W 200
Impedance Ohm 4
Tweeter diaphragm mm (in.) PEI
Woofer Voice Coil Ø mm (in.) 38 (1.5)
Tweeter Voice Coil Ø mm (in.) 28 (1.1)
Frequency Response Hz 100 ÷ 20k
Woofer Magnet size D x d x h mm (in.) 70 x 45 x 7 (2.76 x 1.77 x 0.28)
Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.) 0,94 (2.08)
Woofer Magnet Special Neodymium N38 H
Tweeter Magnet Special Neodymium N38 H
Cone Water repellent pressed paper


SV165Neo
Specs:

Component SPL Midrange
Size mm (in.) 165 (6.5)
Power Handling - Continuous W 150
Power Handling - Peak W 400
Impedance Ohm 4
Voice Coil Ø 38,6 (1.5)
Frequency Response Hz 100 ÷ 10k
Magnet size D x d x h mm (in.) 70 x 45 x 7 (2.76 x 1.77 x 0.28)
Weight of one speaker kg (lb.) 0,9 (1.98)
Magnet Neodymium
Cone Water repellent pressed paper


Optional S8 DSP
Specs:

Nominal Power supply voltage / fuse: 7 ÷ 20 VDC / 1A
Pulse operating voltage: 5 ÷ 24 VDC
Idling current: 0.34 A
OFF current (ART= OFF): <80 uA
OFF current (ART= ON): <80 uA
Remote IN 6 ÷ 20 VDC (10 mA)
Remote OUT 4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): 1.5 ÷ 7 VDC