Velocity RZP2000.6 – 2,000-Watt 6-Channel Motorcycle Amplifier | Built for Harley-Davidson Baggers

Velocity RZP2000.6 – 2,000-Watt 6-Channel Motorcycle Amplifier

Six Channels. Serious Power. One Compact Amplifier.

The Velocity RZP2000.6 brings high-output performance and exceptional system flexibility to Harley-Davidson touring motorcycles. Delivering up to 350 watts RMS per channel at 2 ohms, this compact six-channel amplifier provides the muscle to drive a complete motorcycle audio system without requiring multiple amplifiers.

Its IP65-rated sealed aluminum chassis, fanless cooling system, and weather-resistant connections make it an excellent choice for demanding motorcycle and powersports installations.

Built for Bigger Audio Systems

The RZP2000.6 offers six independent channels, allowing you to power up to eight compatible 4-ohm mids and highs from the first four channels while keeping channels five and six available for subwoofers.

It's an ideal solution for high-output Harley-Davidson audio builds, including systems using the American Hard Bag / Velocity Modular Bass System.

Performance Highlights

• 200W RMS × 6 @ 4Ω – Powerful output across six channels.

• 350W RMS × 6 @ 2Ω – High-output capability for demanding speaker systems.

• 600W RMS × 3 Bridged @ 4Ω – Flexible configurations for compatible speakers and subwoofers.

• Six-Channel Versatility – Run mids, highs, and dedicated subwoofer channels from one amplifier.

• IP65 Weather Protection – Sealed aluminum construction helps protect against moisture, dust, and road spray.

• Fanless Cooling – Aluminum heat-sink design eliminates exposed cooling-fan openings.

• Independent Tuning Controls – Adjustable gains and crossovers for front, rear, and subwoofer channel groups.

• Built-In Protection – Thermal, overload, and short-circuit protection.

Power & Ground Harness Included!

The RZP2000.6 includes an upgraded power and ground harness, eliminating the need to source the main amplifier power wiring separately.

Proper power delivery is essential for high-output amplifiers, and the included harness provides the foundation for a properly configured installation.

Designed for Harley-Davidson. Ready for More.

Whether you're upgrading a Street Glide, Road Glide, or building a custom powersports audio system, the Velocity RZP2000.6 delivers the power and flexibility to take your sound system further.

Six channels. Serious output. Built for the road.

VELOCITY RZP2000.6 TECHNICAL SPECIFICATIONS

GENERAL
- Manufacturer: Velocity Speaker Design
- Model: RZP2000.6
- Amplifier Configuration: 6-Channel
- Chassis: Sealed Aluminum
- Cooling: Fanless
- Weather Protection: IP65 Rated

POWER & PERFORMANCE
- Power @ 4 Ohms: 200W RMS x 6
- Power @ 2 Ohms: 350W RMS x 6
- Bridged Power @ 4 Ohms: 600W RMS x 3
- Rated Test Voltage: 14.4V DC
- Frequency Response: 20Hz–20kHz
- Total Harmonic Distortion: Less Than 0.1%
- Signal-to-Noise Ratio: Greater Than 85dB

AUDIO CONTROLS & CROSSOVERS
- Crossover Modes: High-Pass / Low-Pass / Full-Range
- Adjustable Crossover Range: 40Hz–400Hz
- Gain Controls: Independent Front, Rear & Subwoofer
- Channels 5 & 6: Low-Pass / Full-Range Selectable

INPUTS & CONNECTIONS
- Input Selection: High-Level / Low-Level
- Low-Level Input Sensitivity: 0.7V–6V
- High-Level Input Sensitivity: 1.2V–10V
- Remote Turn-On: 12V Remote / DC-Offset Sensing
- Electrical Connections: Sealed Outboard Connections
- Adjustment Protection: Protective Control End Cap

PROTECTION FEATURES
- Thermal Protection
- Overload Protection
- Short-Circuit Protection

INSTALLATION NOTES
- Requires properly configured gain and crossover settings.
- Compatible speaker impedance and adequate electrical power are essential.
- Two 4-ohm speakers wired in parallel create a 2-ohm load per channel.
- Channels 1–4 can support up to eight compatible midrange/high-frequency speakers in this configuration.
- Channels 5–6 are available for suitable subwoofer configurations.
- High-output systems may require battery or charging-system upgrades.

PACKAGE CONTENTS
- Velocity RZP2000.6 6-Channel Amplifier
- Upgraded Power & Ground Harness

WARRANTY
- 2-Year Manufacturer Warranty Against Manufacturing Defects

IMPORTANT
Bike-specific integration wiring, mounting brackets, and installation tuning are not included unless otherwise specified.