Welcome to our store Learn more

New collections added! Learn more

SPECIAL FINANCING:

ON ALL CUSTOM KITS WHEN YOU CALL IN!

Hertz  |  SKU: FS-Tri-H-SX

Hertz System for 2014-2024 Tri Glide

$1,43100


Description

THE HERTZ 4 SPEAKER Package with Amp Upgrade Specifically for Ultra and Tri Glide Models

This Kit Includes:

  • Hertz SX 165 Neo speakers, 2 sets (**Or, optionally, 1 set of SV 165 Neo for the tourpak instead of SX 165 Neo**)
  • Hertz SP-500.4 600 Watt, 4-channel amplifier (**Or, optionally, the SP-900.4 1,000 Watt amplifier**)
  • Optional Hertz S8 DSP
  • Wire Harnesses to complete installation

A mid-to-high power audio system (depending on the amplifier selection) designed specifically for Harley-Davidson motorcycles. This upgrade delivers exceptional sound quality with its 600 Watt (or 1,000 Watt if upgrading the amplifier) 4-channel amplifier and Hertz coaxial speakers.

** Do You Want the Best Sound Possible? Add the Hertz S8 DSP to this Package. **

↓↓↓ See below for more Info, Features, Specs and Warranty ↓↓↓

Specs

Fitment: 2014 and up Road Glide, Street Glide, Electra Glide, Ultra, CVO, and all amplified and non amplified variations. Amplifier bypass plugs required for all factory amplified systems.?Amplifier bypass plugs are available. Balanced speaker level on RCA, requires an amplifier or DSP that is designed to accept speaker level in on RCA connection (most all quality amplifiers and DSPs do accept speaker level, but check your equipment to make sure). CVO and bikes that only have fairing speakers will require a radio flash to enable the rear RCA output. You can flash your own bike with a separate single bike flash tool.

Specs:

Channels 4 - 3 - 2
Nominal power supply voltage 11 ÷ 15 VDC
Pulse Operating voltage 6 ÷ 16 VDC
Idling current 1.1 A
Idling current when off 0.03 mA
Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A
Remote IN 6 ÷ 15 VDC (9 mA)
DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.02%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 200
Bandwidth @ -3 dB 10 Hz ÷35 kHz
S/N ratio (A weighted @ 1 V Input) 105 dBA
Pre-In sensitivity 0.6 ÷ 6 VRMS
Speaker-In sensitivity 2.2 ÷ 22 VRMS
Minimum load impedance:
@ 4Ch 2Ω
@ 3Ch 2Ω + 2Ω + 4Ω
@ 2Ch 4Ω
IP Rating IP55
Operating Temperature Range 0°C (32°F) to 55°C (131°F)
Max size (mm/inch) 211.6 x 130 x 49 / 8.33 x 5.118 x 1.929
Weight (kg/lbs) 2.15 / 4.74
Adjustable Crossovers yes

Fitment

Fitment: 2014 and up Road Glide, Street Glide, Electra Glide, Ultra, CVO, and all amplified and non amplified variations. Amplifier bypass plugs required for all factory amplified systems.?Amplifier bypass plugs are available. Balanced speaker level on RCA, requires an amplifier or DSP that is designed to accept speaker level in on RCA connection (most all quality amplifiers and DSPs do accept speaker level, but check your equipment to make sure). CVO and bikes that only have fairing speakers will require a radio flash to enable the rear RCA output. You can flash your own bike with a separate single bike flash tool.

Warranty

Payment & Security

Payment methods

  • PayPal
  • Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.