[Figure 1] Contents Tools & Parts Installation Steps Verification & Testing Troubleshooting GAPS Figures & Captions 1. Tools & Parts Tools Required: Power drill Phillips screwdriver Torx drivers Allen...
Tools & Parts Tools Required Wire stripper/crimper Electrical tape or heat shrink tubing Digital multimeter Torx drivers (for fairing removal if needed) Zip ties (optional, for harness management) Parts Supplied...
Vehicle Compatibility: 2014–2023 Harley-Davidson Street Glide, Road Glide, Electra Glide.Not compatible: Ultra models. Some CVO models route rear output under the seat (see Notes below). Tools & Parts Digital multimeter (DMM)...
Tools & Parts Tools Required Wire cutters/strippers Parts Required WH-BYP-RF — Amplifier Bypass Harness (American Hard Bag) WH-RTH — Radio T Harness (American Hard Bag) WH-FPOD or WH-14-PNP-P — Front...
Tools & Parts Tools Required: Wire strippers Cutters Connectors or solder (if attaching to DSP) Parts Provided: WH-RTH Radio T Harness (see figure 1) DSP modular power harness (see...
Introduction This harness provides a simple way to access clean, factory 12 V constant power and ground inside the fairing. It is designed for digital sound processors and other low‐amperage accessories...