ON ALL CUSTOM KITS WHEN YOU CALL IN!
Helix M Four DSP Amplifier - Sound Processor Functions And Interface Guide First Thing! Software download for your amplifier: https://www.audiotec-fischer.de/en/tools/dsp-pc-tool/downloads/ MAIN USER INTERFACE Overview of the main user interface Read Full...
Kenneth Saguban |
Road Glide Tweeter Bracket The kit consists of four main parts 2 Tweeter Adapters 2: #8 - 1.25” Self Tapping Stainless Steel Screws 8: Zip Ties This bracket kit is...
Kenneth Saguban |
Notice: This article covers several kits including the Velocity SPK-14-5x7-OverDrive, LIDS-SPK-14-PR-R690, LIDS-SPK-14-PR-RZ69H and the American Hard Bag IP-14-5x7-6x9. Note that the IP-14-5x7-6x9 kit does not include a tweeter mount...
Kenneth Saguban |
Velocity 10" Razor Harley Woofer Installation The following is installation instructions are for Velocity 10" subwoofers with an American Hard Bag Pro100 installation kit. Before you start it is...
Kenneth Saguban |
'13 & Down 5x7 To 6x9 Adapter Installation. LEVEL THE MOUNTING SURFACE Begin by removing all of the lid hardware and masking off the entire painted surface to...
Kenneth Saguban |
Systems with compression horn tweeters require an extra level of attention when it comes to the tuning process. This is because horns are wildly efficient but that big boost in output...
Kenneth Saguban |
Notice: This guide applies to any 8” or 10” bag woofer system. Please take the time to read and fully understand this article if you want to get the...
Kenneth Saguban |
Aggressor Pro 880 Installation Guide THIS INSTALLATION ARTICLE COVERS THE AGGRESSOR PRO 880 TWIN WOOFER KIT Your Aggressor Pro 880 kit will come with several parts. The Aggressor kit is...
Kenneth Saguban |
American Hard Bag has come up with the first quality amplifier rack that can be mounted inside a saddlebag without drilling holes in the bag. This means that it...
Kenneth Saguban |
Hertz Crossover The passive crossovers in this speaker kit have been modified and pre-wired for you to be plug and play with your ‘14 & up Harley bagger. Use...
Kenneth Saguban |
1998 through 2013 Installation Note It is not recommended to install these amplifiers in the fairings of bikes earlier than 2014. Substantial modifications and fabrication will be required for fitment...
Kenneth Saguban |
MUSWAY M4+ And M6 Installation Guide For 2014 And Later Harley Baggers The following article is an overview of the installation steps and the order of those steps required to...
Kenneth Saguban |